Innolas Laser nanio Series, Руководство пользователя и инструкция по установке

Страница: 11 / 48

When working on the system during installation or in a maintenance situation, observe
the following rules:
• Avoid eye or skin contact to direct or scattered radiation.
• Always wear protective eye wear matched to the emission wavelength of the laser.
Instruct all personnel in the vicinity to wear identical protective eye wear.
• Never look into the laser beam!
• Make sure there are no reflective materials in the beam path that could deflect the
beam toward the operator or another person in the vicinity.
• Use only non-flammable, absorbing or non-reflective materials as beam dumps.
• Never operate the laser in the vicinity of explosive liquids or gases.
• Be aware that laser processing certain materials (e.g. plastics) may create poisonous
fumes and by-products.
1.4. Location of safety labels
The labels shown on the following drawing are fitted to the equipment in the locations
specified and must not be removed or defaced. Immediately replace any missing
labels. Replacement labels can be obtained from InnoLas.
Labels on the side of the laser head are repeated on both side faces.
Figure 1 - Safety label locations
Figure 2 - Label A
nanio Industrial DPSS Laser User and Installation Manual
3 1. Safety