Innolas Laser nanio Series, Руководство пользователя и инструкция по установке

Страница: 31 / 48

5. Locate a replacement unit in the chiller and connect the three pipes.
6. Fully insert the unit into the chiller until it engages with the four fixing studs.
7. Fit the four thumbscrews and tighten them firmly by hand. The chiller is now
ready for use.
5.2.3. Water/air
Refer to the manufacturer's user manual.
DANGER
Risk of electrocution
Switch off and disconnect the system from the AC mains supply before
draining/filling the coolant tank or performing maintenance on the chiller.
5.3. Power supply
DANGER
Risk of electrocution
Switch off and disconnect the equipment from the mains electrical supply before
exposing electrical terminals. Only trained and authorised personnel should
remove covers from the power supply or water to air chiller.
DANGER
Risk of electrocution
Electrical connections must only be made by trained and authorised personnel.
nanio Industrial DPSS Laser User and Installation Manual
23 5. Routine maintenance