Before installation
Installation check list and disconnecting the power supply
Installation checks
Note: Before installation, make sure of the following:
•
Location for the electric vehicle charging station is already agreed upon with the property owner or supervisor
•
The power supply cabling is rated according to the planned installation and local regulations
•
Needed parts and accessories of the product are available
•
Appropriate tools and accessories needed for the installation are available
•
Power supply is disconnected
•
For current leakage protection, a Type-A, # 30mA RCD (Residual Current Device) is required for vehicle charging
supply. If not already available, it must be installed.
•
For short circuit protection, a separate circuit breaker must be installed. Circuit breaker breaking current should
be selected according to local regulations and configured maximum charging current at charging station (DIP
switch configuration).
Needed tools
•
Comprehensive hand tool set including insulated screwdrivers
•
Informative warning tags during the separation of the power supply, and preventive lock or other preventive measure for
circuit breakers
•
Power tools: An electrical power drill with drill bits
•
Electrical testing tools: Standard compliant multimeter (with accessories), standard compliant earth resistance meter (with
accessories)
•
Charging station installation template (included in the product sales package)
Disconnecting power supply
To avoid both personal and equipment hazards, follow these installation steps:
1. Turn the circuit breaker to the "OFF" position to disconnect the power supply.
a) Lock the circuit breaker in the "OFF" position. Use a dedicated lock accessory or use other preventive means for
reconnection prevention.
b) Place a prohibition sign stating "Do not connect" to the locked switch.
2. Make sure there is no power supply at the power supply cabling. Measure with a multimeter.
7
