Clicking the eBox into the eClick
8
05
Now release the bracket and let it
lift automatically.
Please hold the eBox in place with
one hand.
04
Please prepare the installation by
pulling down the locking bracket
completely and ensuring to hold it
firmly in this position. Now place
the eBox carefully on the eClick
and push it firmly in the middle
with the other hand until it stops.
Be careful not to exert excessive
pressure on the circle LEDs.
Important
Make sure that the
flat ribbon data cables
are not trapped
between the eClick
and eBox when
mounting the eBox.
06
Please continue to hold the eBox
in place with one hand.
Check the final position of the
locking bracket, it must be fully
raised. The enlarged detail view
demonstrates the desired final
position. The pin on the locking
bracket must be exactly level with
the triangle on the eBox.
If the bracket has not reached the
desired final position, please push
it further upwards to the desired
final position.
