41
IP ADDRESS:
After pressing “Enter,” enter the IP address in this field.
SUBNET MASK:
After pressing “Enter,” input numbers for the subnet mask.
GATEWAY:
After pressing “Enter,” enter numbers for the default gateway.
2) If PPPOE has been selected, it is necessary to enter the PPPOE username and password
provided by the ISP.
MEDIA PORT:
Port for the private protocol of the DVR and computer; the default is “9000”.
If this port is being used by other server, use another free port for the DVR.
WEB PORT:
Http port; the default port number is “8090”. If Administrator changes the Web
port, to, for example, “8088”, the port number should be added after the IP address, i.e.
http://192.168.15.145
:8088
should entered as the IP address of the Web browser.
IP address:
In this field, enter the IP address of the computer connected to the DVR that is
being used to connect it to the Internet.
PPPOE username and password:
Enter the username and password provided by the ISP.
Click “
” and the system will automatically reboot. After rebooting, the device will save
the username and password, and set PPPOE as the default network type. The IP address will be
automatically configured as a dynamic IP address in the Wide Area Network (WAN).
3) If DHCP is selected, the server will allocate a DVR IP address automatically.
NOTE:
Save the IP address when selecting DHCP, and the DVR will automatically connect
with the server. It will allocate an IP address when the connection is stable, and this address
will be displayed on the interface.
5.5.2 SUB-STREAM
Click “Sub-stream” to enter the “Sub-stream Setup” menu.
Frame
: There are 21 options: 5-25 frames
Содержание inDVRL408RTN
Страница 81: ...80...
