InMotion inDVRL408RTN, Руководство пользователя

Страница: 36 / 104

35
POWER OFF: Use this function to turn off the device.
AUTO MAINTAIN: When “AUTO MAINTAIN” is on, users can set a specific time for the
DVR to restart. The system will restart automatically according to the parameter(s) chosen.
5.2.8 Information
Click “System Settings,” then click “System,” and
select “Information” to enter the “System Info” menu.
The information included accessible through this
interface includes: the device type, the software
version, the release date, import parameters, and
export parameters. It is necessary to export parameter
to a USB drive before importing any parameter from
the USB drive; otherwise, it will not be possible to
successfully import the parameter.
5.3 Record
Move the cursor over the “RECORD” tab (the icon
will be highlighted when selected). Press “Enter” to
enter the “Record” settings interface. The direction
keys and cursor can be used to change the settings.
5.3.1 Record Channel
After clicking the “Channel” tab, users can modify the settings of the camera connected to the
selected channel. Alternatively, users can make the same change (or set of changes) to the
settings of all of the cameras at once. To apply the change(s) to all available channels, first
select “
All ” from the “Channel” field by pressing the arrow buttons; the options include CH1,
CH2, CH3, CH4 and ALL. Then make the desired changes and save them before exiting the
menu.
5.3.2 Record
“ ENABLE” indicates that the channel is enabled for recording.
5.3.3 Recording Bit-rate
There are three options: “GOOD,” “NORMAL,” and “LOW,” corresponding to “HIGHEST,”
“HIGH,” and “NORMAL” data stream standards, respectively. The recording bit rate of each
channel can be adjusted independently.
5.3.4 Record Resolution
This indicates the setup resolution and code rate for recording. There are three options: D1,
HD1, and CIF resolutions. The recording resolution of each channel can be adjusted
independently.