Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. Read each step carefully before beginning. If you
are missing a part please call our toll-free number for assistance
1-800-375-7520
or e-mail us at
ASSEMBLY INSTRUCTIONS
7
STEP 1:
Attach the
REAR STABILIZER(2)
to the
MAIN FRAME(1)
with
CARRIAGE BOLTS(M10x1.5x43mm)
(42)
and
NYLOCK NUTS(M10x1.5)(51).
STEP 2:
Attach the
BASE BOARD(37)
to the
MAIN FRAME(1)
with the
STANDS(40)
and
BUTTON
HEAD BOLTS(M8x1.25x16mm)(59).
STEP 3:
Attach the
LEFT PEDAL CAP(33)
to the
LEFT PEDAL ARM(3)
with
BUTTON HEAD BOLTS
(M8x1.25x20mm)(45).
Repeat on the other side.
NOTE:
The
LEFT
and
RIGHT PEDAL CAPS(33, 34)
have a raised lip on three sides. Attach the
LEFT
and
RIGHT PEDAL CAPS(33, 34)
to the
LEFT
and
RIGHT PEDAL ARMS(3, 4)
so that the side
without the raised lip is on the outside.
STEP 4:
Refer to the illustration below.
Hook the
RESISTANCE TUBES(69)
to the
D RINGS(68)
on
both sides.
Содержание 55-1611
Страница 14: ...PRODUCT PARTS DRAWING BACK FRONT 14...
Страница 18: ...NOTES 18...
