PROGRAM TIMER
IPT-8254
7
1. AC INLET AND FUSE
Connect the supplied standard AC input cable to this
input. The fuse holder below the input contains the AC
overload protection fuse. If the fuse has blown out,
replace it with a fuse of the same type and rating.
If the fuse continues to blow, refer servicing to a
qualified service technician
2. AC POWER OUTLET 1
AC power outlet terminal, able to use maximum 500W.
* Note : The shape of outlets can be different according
to country requirement.
3. AC POWER OUTLET 2
AC power outlet terminal, able to use maximum 30W.
* Note : The shape of outlets can be different according
to country requirement.
4. VOICE INPUT JACK
This jack is intended to receive a signal from the output
of the IVF-8201 (VOICE FILE).
5. CHANNEL INPUT JACK
These are the input jacks for channel 1 through 4.
6. DC INPUT & OUTPUT
DC power input and output terminal, its power source is
DC +24V.
Before connecting, ensure to check voltage and (+), (-)
polarity.
7. REMOTE OUTPUT
Be used for a point to contact external devices and be
operated AC outlet together Connect to IPD-8329
(Power Distributor) or IPX-8116 (Matrix).
8. COMMUNICATION TERMINAL
This is a terminal that communication is done between
our corporation product, IVF-8201 and IPT-8254, and
you can easily perform reservation setting through
management program by connecting a PC.
This terminal uses RS-232C communication method
and the distance to stably transmit and receive data is
maximum 15M.
9. CHANNEL OUTPUT JACK
These are the output connectors for channels 1
through 4.
Rear Panel
