1. Upon completion of the installation, reconnect the negative battery terminal before you start the engine.
2. Align the entire intake system for the best possible fit. Once the intake has been properly fitted continue
to tighten all nuts, bolts and clamps.
3. Periodically, recheck the alignment of the intake system and make sure there is proper clearance around
and along the length of the intake. Failure to follow proper maintenance procedures may cause
damage to the intake and will void the warranty.
4. Start the engine and listen carefully for any odd noises, rattles and/or air leaks prior to taking it for a test
drive. If any problems arise go back and check the vacuum lines, hoses and clamps that maybe causing
leaks or rattles and correct the problem.
Intake
Intake
torque
torque
band
band
<<<
<<<
Base
Base
torque
torque
<<<band
<<<band
h/p
h/p
intake
intake
<<<run
<<<run
<<<
<<<
h/p base
h/p base
run
run
Horsepower gains may vary from car to car and state to state. On this particular day, the base run on the Element was 126.3 horsepower and 122.4 ft./lbs of torque.
Max power 10.8 horsepower
Max torque 12.60 torque
Peak power 19.0 horsepower
Peak torque 15.8 torque
Locate the secondary intake and insert it into the
bumper area via the engine compartment between the
battery and front cross member.
Insert the top end of the intake into the 3” hose (A) Line
up the intake bracket to the vibra-mount stud (B). Tighten
the m6 flange nut and fender washer to the VM stud (B).
Press the filter over the end of the intake and tighten
the filter neck clamp. Align the entire intake for best
fit then continue to tighten all nuts, bolts, and clamps.
(A)
(A)
(B)
(B)
>>>>
>>>>
>>>>
>>>>
Perfect
Perfect
air/fuel
air/fuel
ratio
ratio
5. Check the filter for excessive dirt build up. Clean or replace the filter with an original Injen filter.
Congratulations! You have just completed the installation of the best
intake system sold on the market. Enjoy the added power and performance of your new intake system.
AIR INTAKES
CAR ACCESSORIES
