Part number SP2106
08-09 Scion xB 2.4L 4 cyl.
1- 2 pc. cold air intake
equipped
with
MR Tech and Air Fusion
This system converts into a short ram
1- 3” Injen filter (#1014)
1- 2 1/2” x 3” step hose (#3110)
1- 3” straight hose (#3044)
3- Power Bands
.362/.048
(#4004)
1- Power Band
.312/.040
(#4003)
2- M4 x 10mm
button head
(#6047)
1- M5 x 12mm hex bolt (#6036)
2- m6 vibra-mount (#6020)
2- m6 flange nuts (#6002)
2- Fender washers (#6010)
1- 6 page instruction
Note: All parts and accessories now
sold on-line at :
“injenonline.com”
Congratulations! You have just purchased the best engineered,
dyno-proven cold air intake system available.
Please check the contents of this box immediately.
Report any defective or missing parts to the Authorized Injen
Technology dealer you purchased this product from.
Before installing any parts of this system, please read the instructions
thoroughly. If you have any questions regarding installation please
contact the dealer you purchased this product from.
Installation DOES require some mechanical skills. A qualified
mechanic is always recommended.
*Do not attempt to install the intake system while the engine is hot.
The installation may require removal of radiator fluid line that may
be hot.
Injen Technology offers a limited lifetime warranty to the original
purchaser against defects in materials and workmanship. Warranty
claims must be handled through the dealer from which the item was
purchased.
Injen Technology 244 Pioneer Place Pomona, CA 91768 USA
Please check the contents of this box immediately.
Note: This intake system was Dyno-tested with an Injen filter and
Injen parts. The use of any other filter or part will void the
warranty and CARB exemption number.
Parts and accessories are available on line at “Injenonline.com”
Note:
The installation of this cold air intake does require mechanical skills. Removal of the front bumper requires
loosening and removing several plastic plugs and screws that may be difficult. In addition to removing the
bumper, you will also have to remove the air resonator box, battery and tray when beginning this installation.
Injen strongly recommends that this system be installed by a professional mechanic.
MR
Technology, “The World’s First Tuned air Intake System!”
Factory safe air/fuel ratio’s for Optimum performance
Patent #7,359,795
Now equipped with
“Air Fusion”
Patent pending
Another great invention by Injen Technology
“Why settle for cheap imitations when you can have the original”
Figure 1
Figure 2
