User’s manual
User interface
13
Alarm
communicato
r status
Selection of this icon accesses the management window of the remote communicator for
alarm signalling.
If installed, remote alarm-signalling devices (voice or digital telephone
communicators associated with alarm receiving centres) are in standby status and
operating efficiently.
A fault has occurred on a remote alarm-signalling device. Contact your service
dealer.
An alarm communicator has been disabled.
A remote alarm-signalling device is operating (transmitting a communication)
An alarm communication has been sent and confirmed by the recipient
An alarm communication has been sent but not confirmed by the recipient
A fault has occurred on at least one remote alarm-communicator device. At the
same time, an alarm communication has been sent and confirmed by the recipient
A fault has occurred on at least one remote alarm-communicator device. At the
same time, another remote alarm-signalling device is operating properly
(transmitting a communication)
Fault-
communicato
r status
Selection of this icon accesses the management window of the remote communicator for
fault signalling.
If installed, remote fault-signalling devices (telephone dialers or communicators to
alarm receiving centres) are in standby status and operating efficiently.
A fault has occurred on a remote fault-communicator device.
A fault communicator has been disabled.
A remote fault-signalling device is operating (transmitting a communication)
A fault communication has been sent and confirmed by the recipient
A fault communication has been sent but not confirmed by the recipient
Home
Allows users to go directly to the home screen or, when events are active, from the
home screen to the active events screen.
Icon
Function
