IDS1200 INSTALLER MANUAL - NO. 700-171-02B ISSUED AUGUST 2002 VER 1.18 5
IDS1200 INSTALLER MANUAL
1. Introduction to the IDS1200
The
IDS1200
is a versatile, state of the art, microprocessor based, twelve zone alarm panel. Most features
are optional and may be programmed either directly through the keypad or via the telephone system, using
the
IDS
download software and appropriate modem. There are twelve programmable burglary zones, siren,
auxiliary power outputs and 5 outputs which may be programmed to perform various trigger/switching
functions.
For correct operation the
IDS1200
must be used in conjunction with the specified transformer/battery
combination and peripheral sensors and signalling devices.
1.1 Features
!
Two programmable partitions to which zones can be allocated.
!
Four wire keypad operation - up to a maximum of 5 keypads.
!
Twelve, fully programmable, end-of-line (3K3) supervised zones, and 1 dedicated panic zone per keypad
which is not end-of-line supervised.
!
Optional tamper reporting per zone using double end-of-line resistors (12K and 4K7).
!
Fully programmable digital telephone communicator which supports most industry standard formats.
!
Five programmable trigger outputs.
!
Non volatile
EEPROM
memory retains all program and event log data in the event of a total power
failure.
!
Programmable loop response time.
!
Up and downloadable using
IDS
windows based software.
!
Excellent protection against lightning (provided by specialised “zap tracking” and transient
suppressors).
!
Auto-arm - partitions can be programmed to arm daily at a pre-determined time.
!
Event log (300 events) date and time stamped.
!
Fax defeat allows download access to the panel with other devices connected to the phone line.
!
Dual reporting provides for duplicated reporting to two independent central base stations.
!
Programmable silent or audible panic.
2. Installation and Wiring
Please refer to Figure 1: Connection Diagram and familiarise yourself with the following sections.
