34
PING Count
Set the PING count
4
Packet Size
Set the size of PING detection
32 bytes
Expert Option
Advanced
parameter
of PING
is
available.
N/A
3.6.2 Traceroute
To perform traceroute, select "Tools>>Traceroute" menu in the navigation tree, then enter the
“Traceroute” page.
Table 3-6-2
Traceroute Parameters
Traceroute
Function description: Applied for network routing failures detection.
Parameters
Description
Default
Host
Address of the destination host which to
be detected is required.
N/A
Max. Hops
Set the max. hops for traceroute
20
Timeout
Set the timeout of traceroute
3 s
Protocol
ICMP/UDP
UDP
Expert Option
Advanced parameter for traceroute is
available.
N/A
3.7 STATUS
3.7.1 System
From navigation tree, select Status >> System, then enter the “System” page.
This page displays system statistics, including name, model, serial number, description, current
version, current Bootloader version, router time, PC time, UP time, CPU load and memory
consumption. Technicians may click the <Sync Time> button to synchronize the router with the
system time of the host, as covered in the set-up chapter.
3.7.2 Modem
From navigation tree, select Status >> Modem, then enter the “Modem” page.
This page displays the basic information of dialup, including status, signal level, register status,
