32
Parameters
Description
Default
Show Advanced Options
Click to enable advanced options
Disable(open advanced
options after enabling)
Basic parameters
Tunnel Name
User defines tunnel name
IPSec_tunnel_1
Destination Address
Set destination IP address or domain
name
0. 0. 0. 0
Startup Modes
Select Auto Activated/Triggered by
Data/Passive/Manually Activated
Auto Activated
Restart WAN when failed
Click to enable
Enable
Negotiation Mode
Select main mode or aggressive
mode
Main Mode
IPSec Protocol (Advanced
Option)
Select ESP/AH
ESP
IPSec
Mode
(Advanced
Option)
Select
tunnel
mode/transmission
mode
Tunnel Mode
VPN over IPSec (Advanced
Option)
Select L2TP over IPSec/GRE over
IPSec/None
None
Tunnel Type
Select
Host-Host/Host-Subnet/Subnet-Host/
Subnet-Subnet
Subnet-Subnet
Local subnet address
Set local subnet IP address
192. 168. 2. 1
Local Subnet Mask
Set local subnet mask
255. 255. 255. 0
Peer Subnet Address
Set peer subnet IP address
0. 0. 0. 0
Peer Subnet Mask
Set remote netmask
255. 255. 255. 0
Phase I Parameters
IKE Strategy
Multiple strategies available
3DES-MD5-DH2
IKE Life Cycle
Set IKE life cycle
86400 s
Local ID Type
Select IP address/User FQDN/FQDN
Fill in the ID according to the ID type
(USERFQDN is standard email
format)
IP Address
Peer ID Type
Select IP address/User FQDN/FQDN
IP Address
Authentication method
Select shared key/digital certificate
Shared key
Key
Set IPSec VPN key
N/A
XAUTH Parameters (Advanced Option)
XAUTH Mode
Click to enable XAUTH mode
Disable
XATUTH username
User defines XATUTH username
N/A
XATUTH password
User defines XATUTH password
N/A
MODECFG
Click to enable MODECFG
Disable
Phase II Parameters
IPSec Strategy
Multiple strategies available
3DES-MD5-96
IPSec Life Cycle
Set IPSec life cycle
3600 s
