23
Stop Bit
Set stop bit of serial port
1
Software Flow Control
Enable software flow control can avoid data flow lost
Disable
DTU Configuration
Function Description: Configure the protocol of data transmission, take transparent transmission as
example
DTU Protocol
Set the transmit protocol of DTU
Transparent
Protocol
Configure type of protocol, TCP/UDP
TCP
Mode
Set the connection mode between router and server
Client
Frame Interval
Set frame interval of serial
100 ms
Serial Buffer Frames
Set the number of serial buffer frames
4
Keep alive Interval
Set the interval to test the connectivity between router
and server
60
Keep alive Retry Time
The number of times to retry when connection lose
5
Multi-Server Policy
The policy for multi server
Parallel
Min Reconnect Interval
Set the min interval to reconnect
15
Max Reconnect Interval
Set the max interval to reconnect
180
DTU ID
The ID of router when connect to server
Source IP
The source IP router uses when connect to server, will use
WAN IP if this parameter is blank
Source port
The source port router uses when connect to server, will
use random port if this parameter is blank
DTU ID Report Interval
Set the interval to upload DTU ID
0
Multi Server
Function Description: Router can transmit data to multi servers, take transparent transmission as
example
Server Address
Set the server address to receive data
Server Port
Set the server port to receive data
3.3.6 Traffic Manager
Choose Services >> Traffic Manager to go to the "Traffic Manager" page.
Table 3-3-6 Traffic Manager - Basic Configuration Parameters
