24
Traffic Manager
Function: Monitor and manage the traffic use of the router.
Parameters
Description
Default
Enable
Click to enable the traffic manager function.
Enabled
Alarm Threshold
When the traffic volume used within a month reaches the
threshold, the router reports an alarm.
0
Disconnect
Threshold
When the traffic volume used within a month reaches the
threshold, the router tears down the network connection.
0
3.3.7 Alarm Manager
The alarm function allows you to learn router abnormalities in real time so that you can fix the
problems as early as possible. When an abnormality occurs, the router reports an alarm. You can
select system-defined abnormalities and choose an appropriate inform way to obtain the
abnormality information. All alarms are recorded in alarm logs to facilitate troubleshooting.
Based on types, the alarms are classified into system alarms and port alarms.
System alarm: reported when a system or environment error occurs.
Port alarm: reported when a network port error occurs.
In the Alarm Manager interface, you can perform the following operations:
Select your interested alarm types in the "Alarm Input" area.
Set the alarm notification method of the console in the "Alarm Output" area. The default
output method is log recording. After this function is configured, the system sends generated
alarms to the console.
Choose Services >> Alarm Manager to go to the "Alarm Manager" page.
Table 3-3-7 Alarm Manager Parameters
Alarm Manager
Function: Set your interested alarm types.
Parameters
Description
Default
System Service Fault
Click to enable the system service fault
alarming.
Disabled
Memory Low
Click to enable the memory insufficiency
alarming.
Disabled
WAN Link-Up/Down
Click to enable the link up/down alarming
of the WAN port.
Disabled
LAN Link-Up/Down
Click to enable the link up/down alarming
of LAN ports.
Disabled
