Ingun MA 2x09 Series, Техническое руководство

Страница: 11 / 59

Technical manual MA xxxx with ATS MAxx
©INGUN: Subject to technical changes without notice. E&OE. 10
The functional sequences displayed here are the basis of INGUN product design. These can differ
depending on the test application.
5 A
DDITIONAL
F
UNCTIONS
MA
XXXX
Different versions of the manual test fixtures are available with additional functions as bellow.
The “note for usage” generally must be considered because not all optional functions/additional
functions can be combined and other aspects must be considered.
5.1 Protection conductor wiring and contact protection for dangerous volt-
ages
MA 2x09 MA xx11 MA xx12 MA xx13 MA xx13T MA xx14
40509 39851 39852 39853 39855 39854
ATS MA 09 ATS MA 11 ATS MA 12 ATS MA 13 ATS MA 11 ATS MA 14
41809 41811 41812 41813 41811 41814
When testing with a dangerous voltage (>25V AC and >60V DC) the test fixture must be
equipped with protective equipotential bonding, and protection type IP3x according to DIN EN
60529 must be fulfilled. The customising according to the low-voltage directive (NSRL) consists
of the safety protection conductor wiring (yellow/green cable) to all relevant parts and the check
via insulation resistor at pre-defined places (limit 0.3

).
W
ARNING
:
In case of any changes of the protection conductor wiring (e.g. exchange of wires
or replacement of the cable gland), new measurement of the protection conductor
resistance is necessary!