Ingun MA 2x09 Series, Техническое руководство

Страница: 10 / 59

Technical manual MA xxxx with ATS MAxx
9 ©INGUN: Subject to technical changes without notice. E&OE.
3.2.4 Marking units (ME)
For the permanent “good”-marking, marking units with electrically or
pneumatically operated drive systems are available. The marking is
done in the form of a circular marking or circle point marking by
means of a scratching engraver, cutting engraver or milling en-
graver. The marking units are mounted in the replacement kit com-
pactly and precisely
(see product information “Marking units”)
.
3.2.5 Potentiometer screwing unit/key button activators
Compact manual or automatic screwing units can be used for po-
tentiometer adjustments
(see product information “Automatic screw-
ing unit for potentiometer adjustment
“and “Manual tool for operating
buttons“)
.
4 F
UNCTIONAL SEQUENCE
The typical test sequence is displayed here using a flow-diagram. The steps carried out by the
operator are displayed in green. The UUT (Unit Under Test) detection is part of the ATS custom-
isation; it is not absolutely necessary, but highly recommended.