Ingun MA 2x09 Series, Техническое руководство

Страница: 21 / 59

Technical manual MA xxxx with ATS MAxx
©INGUN: Subject to technical changes without notice. E&OE. 20
7 O
PTIONAL
F
UNCTIONS
MA
XXXX
With the optional functions, the test fixtures can also be upgraded at a later time by the opera-
tors themselves. The options are always delivered with a respective assembly drawing describ-
ing the mounting and optionally also the required operating steps.
Usually all the necessary mounting options are already provided, but machine work requiring
respective operational expertise is sometimes needed.
The “note for usage”must be considered in general because not all optional functions /additional
functions can be combined and/or other aspects must be considered.
Figure 9: example of assembly drawing
7.1 Safety switch for closed pressure frame
When testing in the low-voltage range (i.e. greater than 50V AC or 75V DC) the closed pressure
frame unit is a prerequisite that the testing voltage can be applied. The closed pressure frame
unit therefore has a safety function, and must be checked with an authorised safety switch. The
processing of the signal of the safety switch must fulfil the demands of DIN EN ISO 13849
–
“Safety-related parts of the control unit”.
Note for the use

The safety switch with locking cannot be used as protection for the testing function.

The magnetic safety switch cannot be used with the dual-stage functions.