Ingo Maurer The MaMo Nouchies Wo-Tum-Bu 1, Инструкция по эксплуатации

Страница: 6 / 14

English English
Instructions for assembly
Important:
Please be very careful when removing the lamp from
the packaging. Only touch the concrete base with dry and grease-
free fingers to avoid visible marks!
Caution:
Do not connect the lamp to the power supply until the
assembly is completed.
u Assembly
Screw the bulb provided into the socket. Attach the cylindrical
shield (
1 ) to the mounting rod by fitting the holes in the shield
over the three screws, as shown in fig.
2
.
Tighten the screws if necessary.
Insert the extension rod
(2
) in the opening at the top of the
mounting rod. NB: The holder ( 3 ) at the top of the extension rod
must face in the same direction as the hook (
4
) at the base.
3
+
4
u Attaching the paper shade
Carefully remove the rolled-up shade from the packaging. The
paper has two polycarbonate reinforcing rings with holes in the
centre. Attach one end of the shade to the holder (
3 ) at the top
of the extension rod.
3
Grasp the reinforcement at the other end of the shade, pull it
gently downwards and attach it to the hook (
4
) at the bottom of
the mounting rod.
4
Important: Ensure that the cylindrical shield is correctly
positioned, with the socket squarely in the centre. Never allow the
9
Important information about the paper
The paper used in this lamp is a natural, untreated product. Minor
surface flaws are a result of the manufacturing process. The paper
shade is hand-made, by a patented process (requiring up to eight
different treatments) based on a traditional Japanese method of
textile dyeing. The results look superficially similar, but in fact each
shade is unique.
To protect the paper, the following points should be noted:
• Avoid exposure to damp: do not use the lamp in bathrooms,
kitchens or other rooms where condensation may occur.
• Avoid exposure to strong sunlight or draughts.
• Although the paper is a sensitive material, it can, if necessary,
be gently extended.
1
Do not overstretch it, otherwise it will lose its elasticity and
become unable to regain its shape.
In some cases, the shade takes some time to assume its proper
shape, as the paper has to hang and relax for a while.
Touching the surface may cause shallow dents – these can be
removed by gently pushing them out from the opposite side with
your fingers.
8