7
English
Open the packing box at the marked spot. Remove both
transpor t safety devices on the base plate and pull the
base plate out (see holding instructions) towards the
front.
1
Caution:
Complete the setup and inser t the light bulb
before plugging the lamp into the power supply!
Important:
When lifting the lamp, always grasp it by the
stable base plate, NOT by the cages, which are delicate
and easily damaged.
Box contents include:
1 transformer
1 light bulb
1 protective cover
3 spare spring wires
1 wire hook (tool)
Inserting the light bulb
Remove the front cage (
1
) using a pair of needle-nose
pliers or the wire hook supplied (
2
): Pull gently upwards
to release the three brass spring wires (
3
) from the cage
bars.
2
Unhook the spring wires from the holes in the base plate
and remove the cage.
3
Important:
Do NOT touch the inner glass of the light
bulb with your bare hands (risk of fingermark damage)!
Inser t the light bulb (
4
) and press it firmly into the
socket.
4
Fit the protective cover (
5
) over the light bulb, as shown
in figure
5
.
Close the cage by hooking the three spring wires (
3
) back
4
4
4
4
6
Technische Daten
230/125 Volt, sec. 12 V
˜
, max. 50 Watt Halogen
(No Cool
Beam!)
, 38°
,
Sockel GU 5,3.
230 Volt: elektronischer Transformator mit Schieberegler,
20 - 105 Watt, 50 Hz. Die Leuchte darf nur mit dem von uns
gelieferten Transformator betrieben werden.
125 Volt: elektronischer Transformator 75 Watt, 60 Hz,
nicht dimmbar.
Mindestabstand zu brennbaren Flächen: 50 cm
Dieses Symbol weist darauf hin, dass zwingend
ein “self-shielded” Leuchtmittel verwendet werden
muss.
Eventuell notwendige Reparaturen dürfen nur von einer
Elektrofachkraft durchgeführ t werden. Die äußere Leitung
darf bei Beschädigung nur von der Ingo Maurer GmbH
ausgetauscht werden.
Deutsch
4
4
F
Made in Germany
Содержание 7 Rats
Страница 1: ...Instructions ...
Страница 9: ...3 4a 17 2 1 16 2 3 2 3 1 4 ...
Страница 10: ...6 4 5 1 18 19 4b 5a 5b ...
