9.9 Partial Data Reset
The partial counters Part E, Tpar con and Npcon are set to zero from this menu.
Press
OK
to set the counters to zero. The following message is shown on the screen:
Pressing
OK
again confirms the selection.
12:00 12/04/10
MAIN MENU
Change date
Start / Stop
Reset partial data
Change inverter number
Reset partial data
12:00 09/01/09
Confirm (OK)
Cancel (ESC)
RESET PARTIAL DATA
9.10 Change inverter number
From this menu you can assign the inverter a number. This is required for configuring communications.
With keys
and
you can change the inverter number.
Press
OK
to confirm the number selected.
12:00 12/04/10
MAIN MENU
Change date
Start / Stop
Reset partial data
Change inverter number
12:00 09/01/09
Inverter number 101
Confirm (OK)
Cancel (ESC)
CHANGE INV NUMBER
12:00 12/04/10
MAIN MENU
Change date
Reset partial data
Change inverter number
Start / Stop
12:00
09/01/09
Change to Stop (OK)
Cancel (ESC)
ON / OFF
9.8 Start / Stop
The operation of the inverter can be stopped and started manually using this menu.
The Start or Stop status remains unchanged even if the unit losses its power supply.
Press
OK
to toggle from one status to the other. The display shows the following message:
Select the desired option and press
OK
again. The stopped status is maintained until the menu is accessed again.
Installation Manual
INGECON
®
SUN LITE
AAY2000IKI01
AAY2000IKI01
Rev. _B
Date: March 2011
Page 53
53
DOCUMENTACIÓN RELACIONADA
CATÁLOGOS
MANUALES
Manual de Usuario Ingecon
®
Sun LITE
AAY2000IKE01
Manual de Instalación Ingecon
®
Sun LITE
AAY2000IKH01
Manual de Instalación de los Accesorios de Comunicación
AAX2002IKH01
Ingecon
®
Sun Catálogo Comercial
PC00ISA01_A
Manual de instalación
INGECON
®
SUN LITE
AAY2000IKH01
AAY2000IKH01
Rev. _B
Fecha: Marzo 2011
Page 3