
5.4 Electrical disconnection
To disconnect the unit, follow the steps presented in Section 3 of this manual in reverse.
Take careful note of the following warning:
There are electrical capacitances in the unit which can maintain high voltages even after
having disconnected the inverter from the solar panels and the grid.
And remember:
Ingecon® Sun units may only be opened by authorised personnel.
During installation and maintenance operations on the units, the use of personal protective equipment, hard hat,
gloves and safety footwear is mandatory.
Do not touch the side or rear of the inverter, these can reach high temperatures.
Installation work requiring opening the unit should be done in a dry environment, so that no moisture left inside could
condense and damage the electronics.
Ingeteam Energy, S.A. is not liable for any damages caused by improper use of their equipment.
Installation Manual
INGECON
®
SUN LITE
AAY2000IKI01
AAY2000IKI01
Rev. _B
Date: March 2011
Page 37
37
DOCUMENTACIÓN RELACIONADA
CATÁLOGOS
MANUALES
Manual de Usuario Ingecon
®
Sun LITE
AAY2000IKE01
Manual de Instalación Ingecon
®
Sun LITE
AAY2000IKH01
Manual de Instalación de los Accesorios de Comunicación
AAX2002IKH01
Ingecon
®
Sun Catálogo Comercial
PC00ISA01_A
Manual de instalación
INGECON
®
SUN LITE
AAY2000IKH01
AAY2000IKH01
Rev. _B
Fecha: Marzo 2011
Page 3