4. Safety instructions
4.1. Contents
This section contains safety instructions which must be followed when installing, operating and accessing the unit.
Failure to comply with these instructions may cause injury or even death or cause damage to the unit.
Read this section carefully before working on the unit.
4.2. Symbols
The warnings advise of conditions which may cause serious injury or death and/or damage to the equipment.
The means of avoiding the hazard to both people and the unit is indicated along with the warning.
The symbols and an explanation of their meaning can be seen below.
DANGER: Electric shock
Dangerous voltage warning: Warns of high voltage which can cause injury or even death and/or damage
to the equipment.
General warning: Warns of conditions which might cause injury and/or damage to the equipment.
Caution hot surface: Warns of the existence of hot parts which may cause serious burns.
The specific safety warnings and notes which affect specific tasks are included in each affected chapter and are
repeated and completed in the corresponding critical points.
Please read this information carefully as it is written for your personal safety and to ensure the longest
possible service life for the unit and the devices to which it is connected.
4.3. Definition of tasks to be carried out
Installation, start-up, inspection and maintenance operations may only be carried out by personnel
appropriately qualified and trained in electrical subjects (hereinafter qualified personnel). You are
reminded of the obligation to comply with the legislation applicable to electrical work.
An open enclosure never implies an absence of voltage in the unit, so only qualified personnel may
access the unit, following the safe operation guidelines stipulated in this document at all times.
The set of conditions listed below should be considered as minimum requirements. It is always prefer-
able to shut off the general power. Installation defects may result in unwanted feedback. Danger of
electric shock.
AAY2000IKI04
21
Installation manual
Ingeteam Power Technology, S.A.
Содержание Ingecon mWind 2.5
Страница 1: ...Ingecon Wind Installation manual...
Страница 55: ...Notes...