Ingeteam Ingecon mWind 2.5, Руководство по установке

Страница: 38 / 56

7. Preventive maintenance
The recommended preventive maintenance tasks must be carried out at least ANUALLY, except where otherwise
stated.
7.1. Maintenance tasks
The various maintenance tasks must be performed by qualified personnel. Danger of electric shock.
To access the inside of the unit, the safety recommendations of Chapter “4. Safety instructions” must
be taken into account.
All the maintenance checks included here must be carried out with the machine stopped, under safe
conditions for handling, including those specified by the client for these types of operation.
Status of the enclosure
A visual check of the condition of the housing must be carried out, confirming the condition of the seals and the
cover, as well as the fixing of the units to their anchor points, both at the wall and on the transformer if these exist.
In addition, the condition of the enclosure must be checked for dents or scratches that might degrade the cabinet or
cause it to lose its protection classification. If these types of defect are noticed, the affected parts must be repaired
or replaced.
Check that there is no moisture inside the unit. If moisture exists, dry before making electrical connections.
Check the correct fixing of the housing components to their corresponding anchoring points.
Status of cables and terminals
• Check the correct path of the cables so they do not come into contact with live parts.
• Check the insulation deficiencies and hot spots by checking the colour of the insulation and terminals.
• Visually check that the connections are properly adjusted.
Ventilation
• Checking the status of exhaust fans, cleaning and replacing them if necessary.
• Clean the radiator fins and the ventilation grids.
Environment
Check the environment to avoid amplifying or transmitting the buzz.
AAY2000IKI04
38
Installation manual Ingeteam Power Technology, S.A.