Ingersoll-Rand Thermo King Precedent C-600M, Руководство оператора

Страница: 98 / 152

98 TK 56171-2-OP-EN
Figure 114. Select, Up, Down Keys
Possible mode selections are shown later in this section.
• Only those modes that have been enabled in Guarded Access > Main
Menu Configuration will appear.
• To return to the Standard Display, press the EXIT Key.
Turn Cycle Sentry On or Off
Cycle Sentry can be turned on and off either by using the Cycle Sentry hard
key at the lower right side of the display or from the Main Menu.
IIm mp po orrtta an ntt:: If the unit is in Cycle Sentry Null and the mode is switched to
Continuous Mode, the unit will start automatically.
If the unit is operating in Cycle Sentry Mode, the Cycle Sentry Icon will be
present in the upper right corner of the display as shown (
Figure 115, p. 98 ).
If the Cycle Sentry Icon is not present the unit is operating in Continuous
Mode.
Figure 115. Cycle Sentry Icon
Using the Cycle Sentry Key
Cycle Sentry Mode or Continuous Mode is selected by pressing the Cycle
Sentry Key as shown (
Figure 116, p. 99 ).
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss