Ingersoll-Rand THERMO KING Precedent C-600, Руководство оператора

Страница: 67 / 148

TK 56218-2-OP-EN 67
S Sm ma arrttP Po ow we err ™ ™ E Elle eccttrriicc S Stta an nd db by y O Op pttiio on n:: The Diesel/Electric Standby
selection from the Main Menu allows the operator to manually select diesel
or electric mode operation on units equipped with the electric standby
SmartPower option.
A Ad djju usstt B Brriig gh httn ne essss:: The brightness of the HMI Control Panel display can be
adjusted to allow for changing ambient light conditions.
T Tiim me e:: The Time and Date held by the HMI Control Panel can be checked.
Time and Date cannot be changed from the Main Menu.
C Clle ea arr A Allll E EC CU U F Fa au ullttss:: Pressing this key will clear all existing Engine Control
Unit (ECU) Fault Codes on applicable units with an ECU.
Pretrip
Pretrip Test verifies unit operation. This display allows a Pretrip Test to be
selected and initiated by the operator. If the Pretrip Test is entered with the
unit not running, a Full Pretrip Test with device amp checks will be
performed. If the Pretrip Test is entered with the unit running in either diesel
or electric mode, a Running Pretrip Test is performed. Test results are
reported as PASS, CHECK, or FAIL when the Pretrip Test is completed.
Pretrip Test Conditions
• Current unit settings are saved and restored at the end of the Pretrip Test
or if the unit is turned off and back on.
• Pretrip Test can be run in either Diesel or Electric Mode.
• The unit will auto switch from Diesel Mode to Electric Mode or from
Electric Mode to Diesel Mode during a Pretrip Test if these features are
enabled and the auto switch conditions occur.
Conditions Where Pretrip Tests Are Not Allowed
• If any shutdown alarms are present. Pretrip tests are allowed with some
Check and Log alarms.
• If the unit is in Sleep Mode.
• If the unit is in Service Test Mode, Output Test Mode, or Evacuation
Mode.
Pretrip Test Considerations
When performing a Pretrip Test, the following issues should be considered:
• If running a Pretrip Test on a trailer loaded with dry cargo, verify that
proper airflow can occur around the load. If the load restricts airflow,
false test results may occur. Also, these units have high refrigeration
O Op pe erra attiin ng g IIn nssttrru uccttiio on nss