Ingersoll-Rand SS5L5, Руководство пользователя и список запасных частей

Страница: 15 / 24

22204945 Rev C EN-15
EN
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Oil in discharge air (oil pumping)
Lubricant viscosity too low Drain existing lubricant and refill with proper
lubricant
Detergent type lubricant being used Drain existing lubricant and refill with proper
lubricant
Piston rings damaged or worn (broken, rough
or scratched). Excessive end gap or side
clearance Install ring kit
Piston rings not seated, are stuck in grooves
or end gaps not staggered Adjust piston rings
Cylinder(s) or piston(s) scratched, worn or
scored Repair or replace as required
Worn cylinder finish Deglaze cylinder with 180 grit flex-hone
Excessive condensate in receiver tank Drain receiver tank with manual drain valve
Oil leaking from shaft seal Crankshaft seal worn or crankshaft scored Replace seal air crankshaft assembly
Safety/relief valve “pops” Clogged or dirty inlet and / or discharge line
filter Clean or replace
Compressor valves leaky, broken, carbonized
or loose. Inspect valves. Clean or replace as required.
Install valve kit
Defective safety/relief valve Replace
RELEASED 05/Apr/2018 15:16:08 GMT