Ingersoll-Rand R132-160 kW, Информация о продукте

Страница: 29 / 144

Page 4: Compressor Data
Figure 77: Compressor Data
The following are displayed in this section:
% Energy Savings
% Capacity
Package Power
Power On Hours
Running Hours
Motor Speed
Time
Motor Current
Motor Voltage
AC Input Voltage
DC Bus Voltage
IGBT U Temperature
IGBT V Temperature
IGBT W Temperature
Input Rectifier Temperature
VSD Ambient Temperature
Remote Maximum Speed
Remote Maximum Pressure
Target Pressure
Pages 7-8: Digital Inputs
Figure 78: Digital Inputs
A marked checkbox beside a digital input indicates that the input is in its
TRUE state. For example, Starter Feedback is TRUE when its input is in the
high state, where as, E-Stop is TRUE when its input is at 0Vdc.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The following are displayed in this section:
Emergency Stop
Main Motor Overload
Fan Motor Overload
Condensate Drain Error
Remote Stop
Remote Start
Remote Lead/Lag
Remote Load Enable
Remote Load/Unload
Auxiliary Input 1
Auxiliary Input 2
Dryer High Pressure
Pages 9-10: Digital Outputs
Figure 79: Digital Outputs
A marked checkbox beside a digital output indicates that it is energized.
Starter Contact 1
Starter Contact 2
Fan Starter Contact
Blowdown Solenoid
Modulation Solenoid
Condensate Drain
Dryer Run / Fan Run
PORO Horn
Trip Relay
Warning Relay
Low Voltage Output 1
Low Voltage Output 2
Low Voltage Output
Low Voltage Output 4
NOTICE
(RO) indicates read-only values .
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
EN
EN-9 80446339 Rev C
60313.16.03