Ingersoll-Rand American Standart Nexia, Установка и настройка учетной записи

Страница: 18 / 46

9
Install Silver XM Control
step 6: confirm that the appliance module
was enrolled into the bridge.
1. Reconnect the Bridge to AC power and the router. (Remove the
battery only after you have completed enrolling all devices and
thermostats.) The Bridge will automatically update the Nexia
server about the new module.
2. Log into the homeowner’s Nexia account. Verify successful
enrollment, as indicated by a checkmark next to the name
of the new module, a confirmation message, and a prompt
to assign a new name.
Note: Browser feedback is not immediate. The online display may
take up to 1 minute to change. Be sure to allow time for the browser
to update.
Also remember to stay logged into the homeowner’s
Nexia account until you have enrolled all devices you have
installed, including the thermostat.
step 7: rename the appliance module.
1. Select the new module.
2. Change the name to something descriptive of its location
and/or function; for example, “Kitchen Counter Repeater.”
The homeowner can change the name later if s/he wishes.
Optional: Repeat Steps 4 – 7 to enroll any additional
appliance modules or repeaters as necessary.
step 8: log out of customer’s nexia account
and remove the 9 volt battery.
The battery is for local enrollment only. It is not for “battery backup.”