Ingersoll-Rand 4MXW1609A1, Руководство по установке

Страница: 46 / 47

Indoor unit maintenance
WARNING
1. After removing the filter and in order to prevent injuries, do not touch evaporator fins.
2. To dry the filter and avoid fire or deformity of same, do not use flame, hair drier or any other source of
heat.
1. Clean the outdoor surface of the unit using a dry or humid cloth.
2. If the unit contains debris, it must be cleaned with a mild detergent. Do not use chemical
solutions or flammable liquids for this purpose. Dry the surface using a dry and soft cloth.
3. Clean the filter at least every three months. Clean it more often if the area is very dusty or
smoky.
4. Open the front panel of the indoor unit.
5. Remove the filter holding it from the edges and pulling downward.
6. Clean the filter with a vacuum cleaner or rinse it with clean and cold water.
7. If the filter is very dirty, use warm water (below 115°F/ 45°C). A soft detergent may be used
only if debris cannot be removed with the warm water. Rinse the filter completely before
leaving it to air dry. If the filter cannot be cleaned appropriately, contact your distributor to order
a filter replacement.
8. Leave the filter to air dry to avoid deformity. Do not dry the filter under direct sun rays.
9. Reinstall the filter on its hooks and close the panel.
46
Wall Unit