INGENIA CAH Скачать руководство пользователя страница 41

Страница: 41 / 45

Installation, Operation and Maintenance Manual for Ingenia Outdoor Units

CAH-OD-16-00

11.1 ETL DISCLAIMER (Addition and Modification of components to Ingenia Units in the

field)

If applicable, ETL Certification of this unit pertains to the components supplied by Ingenia

Technologies, as indicated in the unit submittal package.

Any other component(s), not in the said submittals, added and/or connected to the unit,

can void the ETL Certification of the unit if the component(s) are not ETL, UL or CSA listed and

if the connections/wiring are not to the UL standards. Thus Ingenia will not be liable, in any

manner, should any non-listed or certified components are added to the Ingenia ETL listed

units.

Any modifications to existing components on the unit, onsite, will void the ETL certification of

the

unit.

Please consult the Authority Having Jurisdiction (AHJ) when adding components to the ETL

listed unit in the field.

12.0 Replacement Parts

Any replacement parts shall be ordered through your Ingenia representative or contact our
customer service department at 450-979-1212.

Содержание CAH














































Результаты поиска

Содержание CAH

Отзывы:

Бренды по названию

Популярные бренды

INGENIA CAH, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание CAH

Отзывы:

Бренды по названию

Популярные бренды