10
Defined category.
Gas corresponding to the category.
Pressure regarding the gas.
Nominal consumption Q
n
(H
i
).
Flow.
On the other hand, it is very important that the installer knows the gas supply characteristics where
the appliance is to be installed by consulting the supply company and checking that the appliance
is prepared for such installation.
C O N N EC T I N G T H E A P PL I AN C E T O T H E M AI N G AS S U P P L Y
Once the gas dates has been checked, the installer can connect the appliance to the main gas
supply, according to the regulation in force in the destined country. The grill has been
manufactured to be used with the gas of community destined countries. The flexible tube from the
main supply to the appliance inlet must fulfill the national requirement in force and must be
checked periodically and replace it when it will be necessary.
The griddles have the gas inlet 1/2” placed in the left side.
P ER F O R M AN C E C O N T R O L
·The appliance has the necessary instructions for your use
· Control the gas escapes of the appliances.
· Check the ignition and the main burner flame.
· We recommend the user to use the appliance as the instructions.
C O N N EC T I O N F O R T H E R EM O V AL O F V A PO U R S
As the removal method, there are appliances of
A
1
type, defined as appliances without ventilator
not destined to connect to any conduct, neither a removal combustion products dispositive to the
outside where are installed. These appliances will be installed with an enough ventilation to
prevent the non admissible concentration of harmful substance for the health in the local where be
installed as recommend in the installations instructions manual.
The appliance must be installed under extractor hood to secure the complete gas combustion and
burners fumes evacuation in cooking phase, avoiding the concentrations of the fumes and
combustion gases.
I N ST R U C T I O N S F O R C O N V E R S I O N T O O T H E R G AS T Y P ES
IMPORTANT:
The conversion of the appliance to different gases or feed pressures must be
carried out by personnel authorized by the legislation in force in the destined country.
All the appliances are subjected to trials and tests, each one independently and are adjusted to the
gas type indicated on the labels on the appliance and packaging.
In the case that it is necessary to adapt the appliance to another gas type, the enclose kit comprising
of the necessary injector for each gas type must be inspected and the instructions manual followed
to install the suitable injector for the appliance and it must reflect this change.
For the conversion to a different gas type must be replace the injector in the burners.
I N J EC T O R R E PL AC E M EN T
For easy access to the injector and venturi burner, it is only necessary to remove the top plate.To
proceed to the change of injectors according to the gas to be used will take into account the values
of the injector diameters indicated in the technical date table.
Once the injector holder from the set of gas is removed, withdraws the injector and placed the new.
This operation will take place for all burners available to the
appliance.
F L O W P R I M AR Y AI R AD J U ST EM E N T F O R C O M B U ST I O N
The manufacturer gives the appliance with the air adjustment to the
requested gas.
