29
EN
6.3. Switching on the sauna light
6.3.1. Sauna light during operation
The sauna light is switched ON or OFF by pressing the -button.
6.3.2. Sauna light for cleaning
Switch on with the -button (the start screen appears).
The light can now be switched ON or OFF with the
-button.
6.4. Blower - continued work
This display is only shown with active blower function = YES (see section 5.2).
Switch on with the -button (the start screen appears). Push the -button several times until
„blower“
is shown. Use the -button to switch on the blower.
Each time the -button is pressed, the operating time increases by 15 minutes
(the Minus-button decreases the operating time by 15 minutes). A maximum of 60 minutes is possible.
The controls switch off automatically after the set time has expired.
By pressing the or -button, the ventilator program is also terminated.
6.5. Switching off
When the set time is complete, the control switches off automatically.
6.5.1. Post drying at evaporator mode
The evaporator mode starts a drying period of 30 minutes at 80 °C (display shows “dry”). The ventilator is
switched on in the drying phase (with active blower function = YES).
Press the -button to switch off during operation or drying.
6.5.2. Switch off the evaporator sauna during operation:
1 x
-button… Start drying mode (30 min, 80 °C)
2 x
-button… Return to start screen
3 x
-button… Control is switched off (standby)
6.5.3. Switching off the other operating modes:
1 x -button… Return to start screen
2 x -button… Control is switched off (standby)
