30
EN
To change the basic setting, the sauna must be activated in the respective operating mode (sauna, evaporator,
surface heating, radiator).
Generally you can select the adjustable factors by pressing the -button. After 5 seconds without pressing a
button, the adjusted settings are stored and the sauna changes to normal operation.
7.1. Adjusting the sauna operating mode
The sauna operating mode is enabled in the cabin (see section 6.2).
Temperature:
1 x
The display shows “Raum-Temp.” (cabin temp.) - the desired temperature is adjusted by the Plus-
or Minus-button. Temperature adjustment is made in one degree steps between 30 and 110 °C.
Blower: [ only with blower function = YES] (see section 5.2).
2 x
The display shows “blower“. Use the Plus-button to switch the blower on and the
Minus-button to switch it off.
7. CHANGING THE OPERATING VALUES
6.6. Displaying operating statistics
Operating statistics are shown by holding down the -button and by briefly pressing the -button
(when the sauna is off, standby).
oper. hrs: 426:59
S 102:12 218:48
B 102:12 187:02
I
18:00 21:09
Heater Heating time Operating hours
Exit by pressing the -button
Total operating hours
(hrs., minutes)
