infra world TrioSol Sera, Инструкция по эксплуатации, Страница: 23 / 32

1. CONTROLS
Button - ON/OFF
Button - LIGHT
Button - MODE
Button - PLUS, MINUS
Radio remote control for the radiators under the bench
Button - PLUS
Button - MINUS
Button - ON/OFF
2. CHANGING THE LANGUAGE
Hold the
MODE
-button in the standby mode (dark display) for 5 seconds.
Change the language by pressing the
PLUS
-button.
(German -> English -> French -> Dutch).
Confirm by pressing the
MODE
-button.
3. LIGHT
Switch the light ON/OFF by using the
LIGHT
-button. If your cabin is equipped
with an LED spot, you have to switch it on by using the remote control.
4. SWITCHING ON THE INFRARED CABIN
By pressing the
ON/OFF
-button the cabin is switched ON/OFF. Start by pres
-
sing the
PLUS
-button with steamer and the
MINUS
-button without steamer.
The infrared cabin starts with the last setting values (the values remain stored
even after a power failure). The evaporator always starts with 100%.
The radiators under the bench also start with the last setting values. You can
switch the radiators ON/OFF by using the radio remote control. Adjust the
power between 40 % and 100 % with the buttons
PLUS
and
MINUS
.
ATTENTION !
reset to
manufactory
setting !
Operating instruction control unit
5. SETTINGS
1 x Mode - Infrared A-radiator1
By pressing the
MODE
-button (1x) the intensity of „radiator 1“ is adjust
able.
With
PLUS
and
MINUS
the radiation intensity can be adjusted from
40 to 100 % in steps of 5 %.
2 x Mode - Infrared A-radiator 2
By pressing the
MODE
-button (2x) the intensity of „radiator 2“ is adjust
able.
With
PLUS
and
MINUS
the radiation intensity can be adjusted from
40 to 100 % in steps of 5 %.
3 x Mode - Salt evaporator
By pressing the
MODE
-button (3x) the intensity of the salt evaporator is
adjustable. With
PLUS
and
MINUS
the evaporator intensity can be adjusted
from 0, 40 to 100 % in steps of 10 %.
4 x Mode - Cabin temperature
Adjustment of the desired cabin temperature from 30 to 60 °C. At a cabin
temperature of 60 °C all radiators are automatically switched off for safety
reasons (at a cabin temperature of 59 °C they are activated again).
5 x Mode - Surface heating
Adjustment of the desired surface temperature of the surface heating
elements from 30 to 80 °C.
6 x Mode - Running time
Setting of the time with
PLUS
and
MINUS
from 10 min to 2 h (in steps of
10 min.)
Important: The display returns to normal operation after 5 sec. without
pressing a button (on the top right side of the display the 5 sec.
are counted down).
6. SWITCHING OFF
Switching off by briefly pressing the
ON/OFF
-button.
7. RESET TO MANUFACTORY SETTING
If you want to reset to the manufactory settings (operating time: 60 min,
cabin temp.: 60 °C, surface heating: 80 °C, infrared A radiator intensity:
100 %),
keep the
MINUS
+
PLUS
+
MODE
-button pressed at the same time.
The
display will show:
23
GB