manualshive.com logo in svg

InfoSight INFOTAG KE28 Series, Руководство по эксплуатации и обслуживанию, Страница: 12 / 34

Поделиться
Скачать
InfoSight INFOTAG KE28 Series Скачать руководство пользователя страница 12

Page 6

 

Copyright © 2016 InfoSight Corporation All Rights Reserved  

KE-28XX InfoTag

®

 Marker

 

2.  OPERATIONS 

 
2.1  PRINTING A TAG 

 

Note - 

The following assumes the KE28XX marker has already been set up with your particular 

tag layout.   
 
The KE28XX marker can be used as a stand-alone marker or data can be downloaded via 
RS232 data communications.  For demonstration purposes, we will assume the marker will be 
used as a stand alone marker.   
 
Tags can only be printed from two screens on the terminal; the MAIN SCREEN, and the 
OPERATOR SCREEN.  At each of these screens, simply press the PRINT button located on 
the front panel.  DO NOT hold the PRINT button in for more than 3 seconds.  The Laser Marker 
is set up to perform a “TEST PRINT” when the PRINT button is depressed for more than 3 
seconds. 
 
2.1.1  Printing From The Operator Screen 
 
The OPERATOR SCREEN is a supervisor selectable screen.  When the laser marker is 
powered ON, the OPERATOR SCREEN is the screen that is displayed if this option is turned on 
by the supervisor. 
 
The OPERATOR SCREEN can be customized with up to ten prompted fields.  At each prompt 
the operator types in the required data and presses ENTER.  If the supervisor has set up 
verification parameters, the data will be checked for accuracy before the next field can be 
entered.  If the information is entered incorrectly (i.e. an alpha character where a numeric is 
supposed to be), an error message appears and prompts the operator to re-enter the 
information in the correct format.  Once the correct data has been entered, the OPERATOR 
should press the PRINT button on the front control panel.  A typical 6” tag will take about 20 -30 
seconds, depending on model, to print.  After printing the tag is fed through the presentation 
slot for easy break off at the nick of the tag. 
 
 
2.1.2  Printing From The Main Screen 
 
The MAIN SCREEN is the factory default screen.  The MAIN SCREEN contains the pull down 
menus available for tag editing and laser marker setup.  This screen is displayed when the 
marker is powered ON if the OPERATOR SCREEN is disabled. 
 
The MAIN SCREEN can be customized with the same prompted fields as the OPERATOR 
SCREEN.  At each prompt, type the desired information and press ENTER.  Once the correct 
information has been entered, press the PRINT button on the front control panel to print a tag.  
Printing can also be accomplished by using the pull-down menu (top of screen) MARKER.  
Simply choose PRINT from the MARKER pull-down menu to print the desired information typed.  
The printed tag will be presented to the operator through the presentation slot for easy break off 
at the nick of the tag. 

Содержание INFOTAG KE28 Series



































Отзывы:

Нет отзывов