INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – [email protected] –
03 17 AA 59 204 10
38
20
Backup time adjustment
Y
Y
Y
Y
Y
*Y (YES) means that this program can be set in this mode.
3-7. Operating Mode/Status Description
Operating mode/status
AC mode
Description
When the input voltage is within the acceptable range, the UPS will
provide pure and stable AC power to output. The UPS will also charge
the battery in AC mode.
LCD display
CVCF mode
Description
When the input frequency is within 46 to 64Hz, the UPS can be set to a
constant output frequency, 50 Hz or 60 Hz. The UPS will still charge the
battery in this mode.
LCD display
Battery mode
Description
When the input voltage is beyond the acceptable range or if there is a
power failure, the UPS will back up the power from the battery and the
alarm will beep every 4 seconds.
LCD display
Bypass mode
Description
When the input voltage is within the acceptable range and the bypass is
enabled, turn off the UPS and it will enter in Bypass mode. The alarm
beeps every two minutes.
LCD display
Battery Test
Description
When the UPS is in AC mode or CVCF mode, press the
“Test” key for
more than 0.5s. Then the UPS will beep once and start a
“Battery Test”.
The line between I/P and the inverter icons will flash to remind users.
