44
To set the second barcode, set the output sequence to 2, and re-select the box to select a
new address.
And so on, set the third output barcode, set the output sequence to 3.......
The above settings are completed, compiled, and written. You can set the output barcode
sorting function in the frame selection area.
The sorting can also be set by the following rules:
Code system matching: you can choose different code systems (one of the barcode
rules);
Barcode length: According to application requirements, you can choose different lengths
of barcodes (one of the barcode rules);
match characters
Position: Select the position of a barcode, such as barcode ABC23, if you need to find the
position of C, the position is 3.
Characters to be matched: Select the characters to be used as barcode rules.
Note: There are new rules that need to be added to the rule table, compiled and
written, after this taken the matching rules will take effect.