49
8 Other Operations
8.1 To View Decoded Data after Online Setting-up
In the data window, after the device is triggered, if the decoding is successful, the barcode
information will be displayed. As shown in the figure:
8.2 How to Trigger FV10X with Commands
In the data window, select the corresponding command, and click Send Command to
trigger the device. The device trigger command is "TON" by default, and the cancel trigger
command is "TOFF". The command trigger interval can be set, and the timing setting
needs to be checked. The default is 1000ms/time.
If you want to change the trigger or cancel the trigger, you can change it in Settings - Edit
Settings.