EonStor S12E-R1132-4/G1133-2 Installation and Hardware Reference Manual
Figure 2-19: Front View of a Drive Tray whose Bezel Lock in Unlocked
Position
Step 2.
Open the front flap on the drive tray
by pushing the
release button on the front flap (see
Figure 2-20
). The
front flap will automatically spring open.
Figure 2-20: Opening the Drive Tray Front Flap
Step 3.
Align the drive tray with the drive bay
into which you
wish to insert it, and then slide it in. This should be done
smoothly and gently. (See
Figure 2-21
)
Figure 2-21: Installing a Drive Tray
Step 4.
Close the front flap.
Close the front flap properly so
that the connector at the back of the hard drive can be
firmly connected to the corresponding connector on the
backplane board. (See
Figure 2-22
) If the front flap is
not closed properly, the connection between the hard
drive and the subsystem will not be secure.
2-20
