I N T R O D U C T I O N
The Cosy XL Double heater produces radiant heat like the sun, warming people and objects rather
than the air in between. It is mounted on an adjustable brackets that allows the heat to be directed
exactly where it is required. Its attractive, design means that it is effective yet unobtrusive. The Cosy
XL Double weatherproof heater is designed for indoor and outdoor use.
Please read the following instructions carefully before use. The safety of this heater is
guaranteed only by its correct usage in accordance with these instructions, therefore they
should be retained for future reference.
Before using this appliance:
1. Check that the voltage indicated on the units rating label corresponds to the mains supply
voltage.
2.
Do not install the heaters less than the minimum height from the floor as specified below in the
specification - Table. 1.
3. Ensure that the heater has been securely fastened in its final mounting position.
4.
WARNING
- this appliance must be grounded!
5.
WARNING
- Keep the mains cords away from the body of the heater which will get hot during
use.
6.
If a socket outlet is used do not position the outlet immediately behind the heater.
7. Avoid the use of an extension cord with this product.
8. Do not cover or obstruct the heater while it is in use.
9. Do not insert any object through any slot or opening in the heater.
10.
Do not use if guard is not present.
11.
WARNING
- When replacing the emitter or cleaning the unit, ensure that both of the 3-pin
120 volt plugs are removed from its socket outlet or if hard wired circuit is disconnected from the
mains supply.
Note
: always ensure that the emitter is cool before handling.
12.
Do not handle the halogen emitter with bare hands. If it is inadvertently touched,
remove finger marks with a soft cloth and methylated spirit or rubbing alcohol.
Otherwise, the marks will burn into the quartz emitter during use causing premature
heater failure.
13. The heater is not intended for use by young children and must be supervised by a responsible
person at all times.
14. Always remove both of the 3-pin 120 volt plugs on the 120 volt heater if it is not being used.
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
4
