Infopia EASYGLUCO Auto-coding, Руководство по эксплуатации, Страница: 18 / 25

34 35
Taking care of your glucose meter Blood Glucose Program
Cleaning your meter and maintenance
For safe, accurate and long-lasting use of the
EASYGLUCO Auto-coding
TM
Meter,
the meter must be maintained with proper cares
1. The meter should be cared for after testing and cleaned if necessary with a soft
cloth or tissue. If necessary, rubbing alcohol can be used to wipe away dirt on the
outer surface of the meter. Do not use chemical solutions such as benzol or
acetone since both of these solutions can harm and damage the meter surface.
When cleansing the meter with rubbing alcohol, DO NOT pour directly onto the
meter, but use the cloth soaked with a small amount of alcohol. After cleansing
the meter, dry completely at a cool place avoiding the sun rays.
2. Do not soak the meter and test strip into water or liquid. Use as properly as you
can. Strong electromagnetic fields (e.g. mobile phones, microwave ovens) could
disturb the meter function. Do not put the meter and strip near fire or microwave
ovens.
3. After testing, place the
EASYGLUCO Auto-coding
TM
Meter in the carrying case to
prevent loss or damage. Make sure it is placed in a cool and dry area and out of
the reach of children. Do not refrigerate. Avoid exposure to sun.
4. Close the vial cap tightly immediately after removing a
EASYGLUCO Auto-
coding
TM
strip. Please refer to your
EASYGLUCO Auto-coding
TM
strip instruction if
you want to get more information.
5. The lancing device should be cleaned if blood or stain remains after to prevent
infectious diseases.
6. When you need to purchase the lancing device, the lancets and test strip visit
your local pharmacy or contact your local representative.
7. Discard used materials according to the local regulations for contaminated
materials.
8. The blood glucose measuring meter could be sent back to the manufacturer for
recycling or proper disposal after their useful lives. Alternatively the meter shall be
disposed in accordance with national laws after their useful lives.
9. If
EASYGLUCO Auto-coding
TM
meter is not working properly, clean photo sensor
with alcohol gauze after opening the ejector cover. Opening the photo sensor
cover may affect the sensor performance, for which it is strongly recommended
not to do open the cover for other purposes than cleaning
You can transfer test results from the
EASYGLUCO Auto-coding
TM
meter to a
computer where the data can be further analyzed.
You can download for free the
EASYGLUCO Auto-coding
TM
Blood Glucose
Program at our web site http://www.infopia21.com
* Please use the exclusive USB cable provided by infopia
[User]
[cable]
[PC]