Infopia EASYGLUCO Auto-coding, Руководство по эксплуатации, Страница: 14 / 25

26 27
Test strip ejector function
1. After checking your test result, slide the ejector button twice forward to
remove the test strip from the meter.
2. Discard the used strip and lancet to a proper place, according to the local
regulation.
Caution
1. If you push the ejector button forward too much, it may be part of the failure.
2. Do not give strong impact to blood glucose test meter.
Testing Procedure
Step 4-1
If you selected to use the User Activity option
during set up, press up and down button to select
the activity that correlates with your result (refer
to p10), then press .
If you do not select to use user activity option
during set up, press to continue to step 4-2.
Step 4-2
If you selected to use the User ID option during
setup, press
Ƈ
and
Ɖ
button to select the correct
User ID, then press .
caution
1. If you did not activate the User Activity option and/or the User ID option, Step 4-1
and/or Step 4-2 procedures are not conducted.
2. Although User Activity option and/or User ID option are activated, if you pull the
test strip out right after the test, you can not move onto step 4, The test result is
stored, not under a specific User ID and only displayed after deactivating the
User Id option.
3. Please refer to page 13, if you want to set the User Activity option and User ID
option.
Testing Your Blood - Case of activated User Activity option and User
ID option
1. Once the test is complete, pull the Blood glucose test strip forward to remove
the Blood glucose test strip from the Blood glu-
cose test meter.
2. Dispose of used Blood glucose test strip in a sealed container with your
household waste in acordance with local regulations
EASYGLUCO Auto-coding
TM