September 4, 2012
INFODRAW PMRS-100 User Manual v5.1
33
There are two programs through which a user can run the MRS server:
1.
MRS Service Program (Web Admin Interface Server):
This is a Windows Service Program that allows the user to setup the server on any PC or
dedicated server and then access and change settings in the server from any location, using
the web.
(Recommended)
2.
MRS Monitor Server Application:
This program allows the user to run the server in the same program where the video and
audio are streaming. However, the “MRS Monitor” program gives full access to the server
only from the computer itself and most of its features cannot be reached from the outside.
CAUTION:
If you are connecting multiple MRS/PMRS units to the server, it is recommended
NOT
to view the video/audio/GPS streams from the “MRS Monitor Server Application”
itself. The system will be more stable if the data streams are only viewed from other clients
connected to the server. The server software should be used primarily as a communication
program between MRS/PMRS units and MRS Clients. Therefore, when connecting multiple
units to the server, it is recommended to use the
MRS Service Program (Web Admin
Interface Server)
.
