InFocus TD61, Руководство пользователя

Страница: 77 / 102

75
Match the whites
Use color balance to match all the displays in a
group. Reset values on all displays to numbers
shown in top illustration with white test pattern.
Match all displays to least bright display. Change
the Blue value as little as possible.
When adjusting
WHITE BALANCE
-
ALL
you may not
see all three of the red, green, and blue numbers
decrement or increment. This because the
ALL
choice adjusts the colors in proportion to each
other, so that the color remains constant as you
adjust the brightness. For example, if you have the
color set at Red-100 Green-80 and Blue-40 and
adjust down 10 clicks, you will wind up with Red-
90, green-72 and Blue-36. The color has remained
the same and only the brightness has changed.
Green and blue did not change on every one of the
ten clicks.
Match the grays
Adjust the grays using the gray test pattern, again
matching all displays to each other. Choose one
display that has a neutral gray and match them all,
one at a time, to that one.
Advanced Options: Color Balance
For more information on Color Balance see
3.4 “Color Balancing TD61” on page 36
Downloaded from www.Manualslib.com manuals search engine