background image

18

2.3 Installing the 

TD61

The 

TD61

 is meant to be installed on a wall or on an optional stand. It is not designed to sit on its own.

Introduction

The TD61 can be attached to a wall or to an 

optional stand. Hardware for mounting is provided in 
the accessory kit. Included in the accessory kit are 
two mounting bars. The larger of the two is the main 
wall mounting bracket. The smaller one is used as a 
spacer to keep the TD61 vertical when mounted on a 
wall or attached to a stand.

Mounting on a wall

The TD61 weighs about 106 pounds (48.08kg). 

The mounting method that you use must be able to 
support five times this weight (530lbs., 240.4kg). 
Make sure that the wall can support it. Dry wall may 
not be sufficient to handle the weight.

The illustration on the right shows the wall 

mounting bracket installed on a wall. The wall 
mounting bracket is firmly attached to the studs in 
the wall. To prevent the wall mounting bracket from 
bending, due to the weight of the TD61, there must 
be bolts placed within 7.5 inches from each end.

The inset on the illustration highlights a pin on 

the main wall mounting bracket that mates with a 
hole in the slot on the back of the TD61.

CAUTION

Do not lay the TD61 on its face or on its back. 
It must be kept upright at all times.

Mounting TD61 on a wall.

1. Install wall mounting bracket bar on wall. Make 

sure the wall mounting bracket is straight and 
level. If the wall is uneven, use shims to insure 
the wall mounting bracket is straight. Be sure to 
attach to studs in the wall. 

2. Hang the TD61 on the wall mounting bracket bar. 

Make sure the holes in the TD61 wall mounting 
bracket slot mate with the pins on the hangar bar.

Wall mounting bracket installed. Inset shows one of 
the two pins that mate with the holes in the slot in the 
back of the 

TD61

.

Back of 

TD61

 showing wall mounting bracket slot. 

Inset shows one of the two holes that mate with the 
pins on the wall mounting bracket.

TD61

 being lifted in to place on the wall. The slot fits 

over the wall mounting bracket  and is fitted onto the 
mating pins.

Wall mounting 
bracket on wall

Downloaded from 

www.Manualslib.com

 

manuals search engine

 

Содержание TD61







































































































Отзывы: