InFocus TD61, Руководство пользователя

Страница: 26 / 102

24
3.1 Aligning the Image
Aligning the image will probably not be necessary. However should there a be a slight misalignment, it
is important that you do this before you use the Position controls. Adjust the image so that it covers the
entire screen.
What is effective resolution?
The TD61 is the thinnest rear projection DLP
product available. This thin technology comes with
some trade-offs. The ultra wide-angle lens that allows
it to be so thin causes the image to be distorted and
undisplayable at the edges. As a result, the native
1280x720 engine resolution is not viewable on the
screen. The effective resolution of the display (i.e. the
number of pixels visible on the screen) is about
1232x693 pixels, but may vary slightly from unit to
unit. Because the position of internal mirrors and
lenses may shift very slightly during shipment of your
TD61, the effective resolution window may also
shift. The Image Alignment menu allows adjustment
of the effective resolution in order to compensate for
any minor variations that may occur after factory
alignment.
Aligning the Image
1. Turn on the AC power to the display. On first
turn on, the lamp will power up automatically.
(You may choose later to turn off the “auto lamp
on” in the menu. See “Advanced Options: Lamp
Settings” on page 77).
2. Press
MENU
on the remote control.
3. Select
ADVANCED OPTIONS
and press
ENTER
.
4. Select
IMAGE ALIGNMENT
.
5. Select
TEST PATTERN
and use the +/- keys to select
GRID
and check
ILLUMINATE BORDER
Use the test pattern to align the image to the screen.
The
GRID
pattern is good for general alignment.
ILLUMINATE BORDER
will allow you to see just how far
from the edge of the screen the active image will be by
turning the background green. The green background
will appear outside the edges of the test pattern. It
will turn to black once you exit the menu.
Downloaded from www.Manualslib.com manuals search engine