Dual-spectrum Network Bullet Camera User Manual
23
2.3.4.3 Image Temperature Width
Select “Image Temperature Width”, the following parameters will be
displayed. See the figure below:
Figure 2.30
Image Temperature Width Page
Manual Enable: the temperature width of the IR image can be set manually,
set “Threshold-Low” and “Threshold-High” after checking “Manual Enable”,
the image reflects the temperature information between the two thresholds;
uncheck “Manual Enable”, auto temperature width will be set by the device.
2.3.4.4 Global Temperature Measurement
Select “Global Temperature Measurement”, the corresponding parameters will
be displayed beneath, see the figure below:
