Dual-spectrum Network Bullet Camera User Manual
17
it can be set into one line which could be written in Chinese characters,
uppercase and lowercase, figures and special characters, set the coordinate to
be displayed; choose time format, set the coordinate to be displayed; check
“Frame Rate” and set the coordinate to be displayed, click “ok”.
2.3.3.2Video Coding
Click “Video Coding”, the corresponding setting will be unfolded beneath, see
the following figure:
Figure 2.21
Video Coding Page
Channel 1 and Channel 2 can be chosen, channel 1 is visible light, channel 2 is
Infrared, which supports main stream and sub stream respectively. 1080P_30HZ
（
1920*1080
）
,720P_30HZ
（
1280*720
）
,CIF
（
352*288
）
,4CIF
（
704*576
）
,VGA
（
640*480
）
,QVGA
（
320X240
）
can be chosen for image size. Make sure that
the average frame rate of the image is the same while determining the frame rate,
change the average frame rate according to the image complexity while
determining the image quality.
